![]() If you need professional data recovery services or if you would like to speak with a hard drive recovery specialist, call us today at 1.800.237.4200. Many newer devices use a Globally Unique Idenitifier (GUID).ĭ does not offer support for the information provided on this page. Please note that this is only applicable for drives that actually use a master boot record. The drive’s Sector 0 contains its master boot record (MBR), which contains a simple code between 1BE and 1FF (in decimal 446-511) that matches up with the hexadecimal flags listed below.īy accessing a hard drive’s MBR and comparing it with this table, you can easily find the partition information for a given hard drive. Hexadecimal flags are values that give information about a hard drive’s partition attributes. Conclusion:īecause of the relationship between load and accuracy, we recommend selecting an instrument capacity as close as possible to the maximum measured load.What are Hexadecimal Flags for Partition Types? For a 30.00 lbF load, the fixed error equals ☐.05 ÷ 30.00 lbF = ☐.17% of reading. For a 1.00 lbF load, the fixed error equals ☐.05 ÷ 1.00 lbF = ±5% of reading. To calculate the error as a percentage of reading, divide the fixed error by the measured value. Percentage of Reading:īecause of these fixed errors, lower measured values will be more inaccurate as a percentage of reading.įurther using the example of an M5-50 force gauge, a fixed error of ☐.05 lbF represents a higher error as a percentage of reading for a load of 1.00 lbF than 30.00 lbF. In a specific example for the Model MR50-12, the accuracy becomes ☐.55% x 135 Ncm = ☐.7425 Ncm. Using the example of a Series R50 torque sensor with Model 3i indicator, add ☐.35% to ☐.2%, which equals ☐.55%. Models 7i and 5i indicators have accuracy values of ☐.1% FS, while the Model 3i is rated at ☐.2% FS. The accuracies of the sensor and the indicator must be added together. Example 2 – Plug & Test ® indicators and sensors: For example, if the displayed value is 30.00 lbF, the true reading will be ≥29.95 lbF and ≤30.05 lbF. ![]() This means that any displayed reading may be higher or lower by up to 0.05 lbF. Multiply ☐.1% by 50 lbF, which equals ☐.05 lbF. To determine the measurement error as an actual load value, multiply the accuracy percentage by the instrument’s capacity. Mark-10 defines accuracy as a percentage of full scale of the instrument. * Do not use for compression applications ![]() 1 of G1038 through G1024)Īccessories for FS05-200 – FS05-500 sensorsĪttachments kit (qty. Adapter, FS05 sensor / PTAF adapter, to Plug & Test® connector /į755, F755S, F1505, F1505S test frames, 10 in / 250 mm cableĮxtension cable, 12 in / 305 mm, Plug & Test®, male/femaleĪccessories for FS05-012 – FS05-100 sensorsĪttachments kit (qty. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |